NCR 7158, Owner'S Manual

Page: 152 / 314

7-24 Chapter 7: Programming Guide
Perform Full Knife Cut
ASCII : EM or ESC i
Hexadecimal : 19 or 1B 69
Decimal: 25 or 27 105
Cuts the receipt, leaving .20 inch (5 mm) of paper. This command is
implemented the same as Partial Knife Cut (1A, 1B 6D). There are two
codes for this command. Both codes perform the same function.
Line Feed is executed first if print buffer is not empty.
This command is processed regardless of which station is selected.
Perform Partial Knife Cut
ASCII : SUB or ESC m
Hexadecimal : 1A or 1B 6D
Decimal: 26 or 27 109
Cuts the receipt, leaving 5 mm (.20 inch) of paper. This command is
implemented the same as Full Knife Cut (19, 1B 69).
There are two codes for this command and both perform the same
function.
Exceptions:
Line Feed is executed first if the buffer is not empty.
This command is processed regardless of which station is selected.
Generate Tone
ASCII: ESC BEL
Hexadecimal: 1B 07
Decimal: 27 7
Generates an audible tone. Performed by the printer to signal certain
conditions.