NCR 7158, Owner'S Manual, Page: 159 / 314

Chapter 7: Programming Guide 7-31
Enable or Disable Online Switch
ASCII : ESC c 6 n
Hexadecimal : 1B 63 36 n
Decimal: 27 99 54 n
Value of n : 0, 1
Since the
7158
does not have an Online Switch, this command is
ignored.
Set Slip Paper Waiting Time
ASCII : ESC f m n
Hexadecimal : 1B 66 m n
Decimal: 27 102 m n
Value of m : Minutes
Value of n : Tenths of seconds
Sets the time (in m minutes) that the printer waits for a slip to be
inserted into the slip station. It also sets the time ( n x 0.1 seconds) that
the printer waits to close the platen and start printing once the slip has
been inserted. The printer reads that a slip is inserted when the leading
edge and trailing edge sensors are covered. The LED on the slip table is
lit (green) when both sensors are covered.
If a slip is not inserted in the time specified, the receipt station is
selected for the next function. If
m = 0, the printer waits forever for a
slip to be inserted. The times set by this command are used only by the
command, Select Receipt or Slip for Printing, Slip for MICR Read (1B
63 30
n ), with n set to 04.