NCR 5966, User Manual

Page: 50 / 54

9-2 Chapter 9: Maintenance
Cleaning the Glass
1. Spray an ammonia-based glass cleaner on a soft cloth and gently wipe the glass screen
clean.
Warning:
Do not use any other types of cleaners such as vinegar, solvents, or
degreasers. These can damage the screen.
2. Wipe the screen and edges dry.
3. Allow the glass and screen edges to completely dry before using the unit.
4. When cleaning has been completed, plug in the keyboard cable and power on the
workstation.
MSR Cleaning Procedures
MSR Cleaning and Treatment Cards
Part Part Number
MSR Cleaning Card, Dry 998-0052929
MSR Cleaning Card, Wet 603-9014730 (box of 50)
MSR Treatment Card 497-0453056 (box of 20)
MSR Treatment Card
The MSR Treatment Card is used to assist in protecting Magnetic Stripe Readers from
Electrostatic Discharge (ESD), which can cause failures when swiping cards that have metallic
hologram stripes.
Swipe the card through the MSR in a smooth motion. Only swipe it down ONCE and up
ONCE. Allow the device to dry for 5 minutes before swiping any other cards.
Note:
Each long side of the card may be used twice. Each short side of the card may be used
only once. Thus, a single card can treat 6 MSR devices with one UP and one DOWN swipe per
MSR device. These limits should not be exceeded due to the possibility of spreading
contaminants from machine to machine and/or reducing ESD protection.