55
NH 2001M
NBase Communications
set-prt-prio
Usage:
set-prt-prio
<port_number> <port_priority>
This command sets the Spanning Tree port priority.
port_number
is the deci-
mal port number, and
port_priority
is an integer in the range 1..255. This is
equivalent to setting the MIB variable dot1dStpPortPriority (RFC 1493).
set-prt-enb
Usage:
set-prt-enb
<port_number> {enable|disable}
This command enables or disables a port in the Spanning Tree.
port_number
is the integer port number. This is equivalent to setting the MIB variable
dot1dStpPortEnable (RFC 1493).
set-prt-pcost
Usage:
set-prt-pcost
<port_number> <path_cost>
This command sets the Spanning Tree port path cost.
port_number
is the inte-
ger port number, and
path_cost
is an integer path cost in the range 1..65535.
This is equivalent to setting the MIB variable dot1dStpPortPathCost (RFC
1493). Using 0 as
path_cost
causes the switch to calculate the path cost auto-
matically according to the port speed.
AI2001SB.QXD 4/5/98 11:27 AM Page 55