47
NH 2001M
NBase Communications
Port Monitoring
set-mon-port
This command sets the monitoring port (port containing the monitoring
device, sniffer port). All traffic from the port specified by the monitor com-
mand will be duplicated on
port. port
is a decimal port number.
Usage:
set-mon-port <
port>
monitor
This command sets the port to be monitored and starts the monitoring process.
port
is a decimal port number. All traffic from this port will be duplicated on
the monitoring port specified by the set-mon-port command. The monitoring
device or sniffer must be connected to the monitoring port before monitoring
is activated.
Usage:
monitor <
port>
stop-mon
This command ends port monitoring.
get-nv-mon
This command retrieves the port monitoring information stored by the save-
mon command in the NVRAM.
save-mon
This command saves the current port monitoring information (including set-
mon-port and monitor commands) into the NVRAM, so that the monitoring
will be restarted upon device reset.
clear-nv-mon
This command clears the port monitoring information previously stored in the
NVRAM with the save-mon command.
AI2001SB.QXD 4/5/98 11:27 AM Page 47
