26
NH 2001M
NBase Communications
set-attr-text
This command sets the text display attributes.
Usage:
set-attr-msg <
number of option>
[arg #0] options: 0-normal,1-bold,2-underline,4-blink,8-reverse
SYS_consol>
set-passwd
The console requires the user to enter a password in order to log in, preventing
unauthorized access. The set-passwd command allows the user to change the
console password. The system first prompts the user for the original password.
Then the user is asked to input a new password, and then type it again for veri-
fication. At no time are any of the passwords echoed back to the user.
If the user enters the old password incorrectly or fails to verify the new pass-
word correctly, the password will not be changed.
SYS_console>set-passwd
SYS_console>
Enter old password:
Enter new password:
Enter new password again:
Error : different new passwords
If the password change succeeds, the system will respond accordingly.
SYS_console>set-passwd
SYS_console>
Enter old password:
Enter new password:
Enter new password again:
CLI running password changed
CLI password change in the NVRAM OK
AI2001SB.QXD 4/5/98 11:27 AM Page 26
