61
NH 2001M
NBase Communications
SNMP Setup
1. Set up the SNMP communities strings for the two access modes: read and
write (see SNMP Commands). Confirm that the read and write
communities were properly accepted:
SYS_console> set-comm read public
New read community is: <public>
SYS_console> set-comm write private
New write community is: <private>
SYS_console> get-comm *
Current read community is: <public>
Current write community is: <private>
SYS_console>
2. Set up the trap receiver table: add the Network Manager Station(s) that are
to receive system generated traps:
SYS_console> add-trap 129.1.1.76 public
Entry 129.1.1.76 - public added
SNMP TRAP TABLE
---------------
---------------
IPADDR
COMMUNITY
______________________________
129.001.001.065
-------
PUBLIC
129.001.001.076
-------
PUBLIC
______________________________
AI2001SB.QXD 4/5/98 11:27 AM Page 61
