Microfit-6 connector
1 - CAN interface line (CANL)
2 - RS-485 interface line (RS-485B (-))
3 - RS-232 Interface Line (RS-232RX)
4 - CAN interface line (CANL)
5 - RS-485 interface line (RS-485A (+))
6 - RS-232 Interface Line (RS-232TX)
The digital interface RS-232
is designed for a connection of various devices transmitting and receiving
information on this interface for example, a fuel level sensor, CAN bus adapter, tachographs, RFID, MODBUS devices,
etc.
The digital interface RS-485
is designed for connection of various devices transmitting and receiving
information on this interface, for example, fuel level sensors (up to 16 pcs.), CAN bus adapter, tachographs, RFID,
MODBUS devices, etc.
CAN interface
is used for direct connection to CAN bus, tachograph or sensor.
Microfit-4 connector
1 - Microphone negative contact (MIC-)
2 - Negative speaker contact (SPK-)
3 - Microphone positive contact (MIC +)
4 - Positive contact of the speaker (SPK +)
Attention!
Observe the polarity when connecting the microphone.
Summary of Contents for SIGNAL S-2651
Page 16: ...Figure 19 Figure 20...
