Navman M-Nav 750, User Manual

Page: 9 / 56

M-Nav 750 | User Manual
9
Component Description
1 External GPS antenna
connector Connector is located under the black dust cap. Use only if you
have purchased an optional external GPS antenna (see Section
2.2).
2 Jack point Headset connection point (optional).
3 Mini USB port External connection port (not used).
4
SD card Contains the maps for the navigation feature.
5
Reset button Restart the M-Nav 750 during the upgrade process.
6 Standby button Press to toggle the M-Nav 750 between operating and standby
state. When the M-Nav 750 is in standby state and the screen
is blank, just press the standby button to re-display the most
recent screen.
( Note: if the M-Nav 750 internal battery has
discharged the splash screen will be displayed instead).
7 Hot button Press to return to the Main Menu.
8 Internal GPS antenna Approximate position of the internal GPS antenna that is built
into the M-Nav 750 and is not visible to view.
9 Not in use Not applicable.
10 LED Battery status. LED glows red when battery is charging.
LED glows green when battery is charged.
11 Screen Displays menus, maps and messages.
12 Microphone Not used in M-Nav 750.
13
Light sensor Automatically helps to adjust the screen brightness to a suitable
level for the current lighting conditions.
14 Speaker Provides system sounds and navigational voice prompts.
15 ON/OFF switch Switch the internal battery ON or OFF. Usually switched ON.
16 4-pin serial connection When the M-Nav 750 is in its cradle, this serial connection
provides external power and data from the Qube tracking device.