Navman M-Nav 750, User Manual

Page: 45 / 56

M-Nav 750 | User Manual
45
To specify the load details, touch Load .
The ‘Load’ screen is displayed.
Use the blue sliders to specify any or all of the details shown.
Touch a blue slider and move it along the bar to change the
existing setting.
When you have fi nished, touch either Back to specify more
truck attributes, or Close to save the settings automatically
and re-display the map.
To specify the truck type or the type of cargo, touch
Truck & Cargo Types .
The ‘Truck & Cargo Types’ menu is displayed with the
current settings.
Touch the setting that you want to change. A list of choices
is displayed.
This example shows the list of cargo types. A red circle
identifi es the cargo type that is selected.
Touch a cargo type to change the current setting.
When you have fi nished, touch Back to specify more truck
attributes, or Close to save the settings automatically and
re-display the map.
10.3 Set Road Types to Avoid
WARNING: The M-Nav 750 can calculate a route that avoids certain types of road that you
specify (e.g. toll roads) unless there is no alternative route. In this case, the route will use these
road types but will not advise you of this.
If you must avoid certain types of road, you must exclude them (see Section 10.4).
Note: This section assumes that no current route is displayed on your M-Nav 750.
Press the Hot Button on the top of the M-Nav 750 to display
the ‘Main Menu’.
Touch Nav . to display the map.
Touch Route to display the ‘Route’ menu.
Touch the down-arrow to scroll through the listing then
touch
Avoid road types .