Naviter Oudie 4, Manual

Page: 91 / 158

Menu 86
© 2003 - 2016 ... Naviter d.o.o.
7.20 Wind
This dialog lets you see the wind in the third dimension as well as quickly adjust the wind for either one
or several layers.
To change the wind:
1. select a layer or several layers by dragging over the left side of the dialog,
2. draw a wind vector in the square in the lower right corner,
3. longer line means stronger wind. Direction of the movement determines direction of the wind,
4. If needed, adjust Direction and Speed with the buttons in the lower part of the display,
5. tap Apply, then OK.
Wind is calculated using three methods in Oudie 4:
. Position drift when Lat/Lon are the only available data,
. Groundspeed difference when groundspeed and track are received from the GPS,