Naviter Oudie 4, Manual

Page: 17 / 158

Getting started 12
© 2003 - 2016 ... Naviter d.o.o.
Command bar
holds 2 shortcuts to specific actions. In addition to the Command bar, actions are also assigned to any
hardware buttons on the Pocket PC. You can select which buttons do which actions through
Menu >
Settings > Commands .
The default actions for software buttons from left to right (Command bar) are:
.
Zoom
. Menu
Try the functions of these buttons.
See also:
Getting Started
2.5 Using vario
Oudie 4 is now assisted by inertial sensors (gyros, accelerometers and magnetometers). Contrary to our
initial expectations the inertial vario – when done right – is a real benefit and does provide additional
information to pilot through its instantaneous response without being nervous or too sensitive.
You can control the audio settings of the vario on the Menu > Settings > Vario page. We went into a
lot of trouble fine tuning the vario sound. Make sure to try the default settings in the air before you
change them.
You can control the size and position of the Vario Symbol on the map. Simply drag it on the screen if you
wish to move it to a new position. Go to
Menu > Settings > Symbols > Vario to change it size and
appearance. You can choose from two different shapes for the vario, its transparency, size and more.
Once you finished with selected settings you can also ?lock? vario position: Menu > Settings > Symbols
> Vario > Do not allow drag (remove checkmark) > OK.
If you want to remember this setting, please save the profile with Menu > Next > Save Settings > Save
Profile > Yes.
56
117
68
62
5
125
108