Naviter Oudie 4, Manual

Page: 18 / 158

Oudie 4 13
© 2003 - 2016 ... Naviter d.o.o.
Red symbol is average vario for last circle in thermal. Blue symbol is last (current) thermal vario.
Practically is very useful to see when you climbing if thermal is increasing (red diamond is above blue T)
or decreasing (red diamond is below blue T).
2.6 Copying files to Oudie 4
Copying files on the Oudie 4 similar to Upgrading the firmware . Just copy files in the root of your
Oudie's 3 Resident Flash memory when connected to PC with the supplied USB cable.
If you need more instructions this is the whole procedure:
1. Connect your Oudie 4 with PC using the USB cable which was supplied in the box,
2. Once connected, tap "Connect to PC" or the USB Stick icon on Oudie 4,
3. You should now see Oudie 4 as an external Mass Storage drive on your PC (named TFAT),
4. Copy Files to the root or folder on your Oudie 4 device,
5. Once you finished copying files Safely remove your Oudie 4 from the PC software.
6. Disconnect Oudie 4 from PC and run the Oudie 4 software.
6