![background image](http://html1.mh-extra.com/html/navitar/colorpro/colorpro_user-manual_3603824017.webp)
Standard Set-up & Operation
Turning the
Power On
Determining
Projected
Image
Position
Adjusting
Focus
Place a loaded slide tray on the projector. Turn the power
switch and the lamp switch to ON. The LED will light.
Select the most suitable Navitar slide projection lens
according to the width of the screen and projection
distance.
To mount a projection lens on the projector, just insert the
lens into the lens port of the projector.
If you selected a zoom lens with a focal length of 228mm
or more, or a 150-230mm or 200-300mm zoom lens
support, insert the support bracket into a pin at the
bottom of the projector and fasten with a screw.
For adjusting the projected image size, move the position
of the projector forward or backward or use a zoom lens.
To change the height and slant of the image, position the
adjustable screw legs.
For fine adjustment, use the shift-1 knob for vertical
adjustment and the shift-2 knob for horizontal adjustment.
(Model CP-300SD).
Roughly adjust the focus of the projected image by
adjusting the lens manually. Adjust a Navitar lens by
moving it horizontally in or out. Adjust focus further by
means of the focus switch.
To start projection, push the forward or reverse button.
To end projection, turn the lamp switch to OFF. Allow the
lamp to cool for 2-3 minutes before turning the power
switch OFF.
Starting &
Finishing
Projection
Selecting a
Lens
Mounting a
Lens
16