Installing & Removing the Slide Tray
Installing the
Slide Tray
Removing the
Slide Tray
Match the zero-position of the slide tray with the
projector’s slide gate to easiliy install the slide tray.
When the tray is properly installed, it is “locked” to the
projector.
If the slide tray cannot be installed firmly on the projector,
check the bottom of the tray. The slide holding plate might
be fastened with a latch. Unfasten the latch and try to
install the slide tray again.
To remove the slide tray, follow the above procedure,
matching the slide tray zero-position with the slide gate.
If you push the forward or reverse button repeatedly, the
slide tray will rotate rapidly, automatically stopping at the
zero-position. In this position, the tray should slide off
easily.
If the slide tray jams or cannot be removed with ease, do
not force it. The slide tray can be released by pushing the
tray lock release lever. This lever can also be used to
remove the slide tray in case of an emergency.
15
