International LT625
COMPANY CONFIDENTIAL
© 2019 SmartDrive Systems, Inc. This information is intended for use by SmartDrive customers only. Any other use without the express written consent of SmartDrive Systems, Inc. is strictly prohibited.
Rev 5, August 04, 2020
Service Loops
Before connection cables to the controller, coil excess wiring in an
8” loop and secure with zip ties
Zip Ties
Use zip ties a needs to secure wiring
Controller SMB Connectors
Press down on each SMB Coaxial connector to ensure a good
connection
Molex Connectors
Push and lightly pull each Molex connector to ensure that the
snap-in clip is secure
OBDII Connectors
Use SmartDrive banded zip ties around the connectors to prevent
them from coming loose and to identify tampering
Best Practice: Cable Routing
SMB
Connector
Molex
Connector
Service
Loops
SmartDrive
Zip Ties
