International LT625
COMPANY CONFIDENTIAL
© 2019 SmartDrive Systems, Inc. This information is intended for use by SmartDrive customers only. Any other use without the express written consent of SmartDrive Systems, Inc. is strictly prohibited.
Rev 5, August 04, 2020
VSA - MASTER INSTALL SPECIFICATION
The VSA is the approved hardware installation and wiring spec for
this vehicle make-model and year ranges
Specific details are defined within – check the model year you are
installing on as it specifies:
Appropriate SmartDrive wiring harness to use
Location and instructions for the approved Data Link
Connector (DLC)
Approved locations and install details for cameras,
controller, keypad, and sensor bar
The source and approved method to obtain uninterrupted
constant power, true ignition, and chassis ground
How to connect cables to the controller
How to test, troubleshoot, and diagnose
How to call into Technical Support for final QA validation
CAUTION:
EXCEPTION MANAGEMENT
Contact your SmartDrive Project and Account Manager
if anything within this document cannot be followed
Toll free number (866) 933-9930 Option 1 or their
direct phone number
All exceptions must be documented and approved by
SmartDrive and Customer before proceeding with
installations
Vehicle Specification Assessment (VSA) & Exception Management
