International LT625
COMPANY CONFIDENTIAL
© 2019 SmartDrive Systems, Inc. This information is intended for use by SmartDrive customers only. Any other use without the express written consent of SmartDrive Systems, Inc. is strictly prohibited.
Rev 5, August 04, 2020
1.
Move the vehicle outside to obtain cellular connectivity
2.
Start/Crank the vehicle and let it run for 30-60 seconds
before triggering an event to ensure ECU data is being
gathered.
3.
Turn the windshield wipers on to ensure the Road-Facing
camera is in the windshield wiper path.
4.
Fully extend and place all windshield visors down to ensure
the Cab-Facing camera has a clear view of the driver (no
obstructions).
5.
Verify the system has a cellular connection by observing a
solid blue gear LED on the Sensor Bar.
Preparing Diagnostic Mode and checking cellular connectivity
