GETTING STARTED
IMPORTANT –
User permissions are automatically granted during the first logon of the application.
Figure 3
User Authentication Window
9.
The User Authentication window appears (Figure 3). Enter your username and password and click OK.
NOTE – When you log in for the first time, the software will start and begin to update itself.
NOTE – The NavKal
™
program will not function until you have successfully logged in at least once while
connected to the network. You may need to consult with the technical computer support staff if the
NavKal
™
program cannot connect to the Navistar site. Error messages will be generated if connection
to Navistar fails. Internet firewalls must be configured to allow two-way communication to the following
Navistar host names:
•
*.navistar.com
•
*.internationaldelivers.com
•
*.amazonaws.com
•
*.cloudfront.net
Be aware underlying IP addresses for Navistar hosts are subject to change and may vary by region.
When possible, grant access by host name rather than IP address.
5
Summary of Contents for NavKal
Page 2: ......
Page 4: ...TABLE OF CONTENTS ii...
