VEHICLE CONNECTION
CONNECTING SOFTWARE
1.
Key ON, Engine OFF.
2.
Using interface cable, connect EST to PC and vehicle's diagnostic connector.
3.
Start the NavKal
™
software and select the appropriate interface device (refer to Interface Device Section).
A detection process will begin and connect automatically.
1. Engine folder
2. OK button
Figure 7
Engine Select
NOTE – If NavKal
™
software cannot detect the Engine Serial Number (ESN), then the engine may need
to be selected.
4.
In the File menu, open the SELECT ENGINE folder (Figure 7, Item 1). Then, select associated engine
from pop-up box and click OK (Figure 7, Item 2).
12
Summary of Contents for NavKal
Page 2: ......
Page 4: ...TABLE OF CONTENTS ii...
