Navionics Raychart 425, Owner'S Handbook Manual

Page: 56 / 114

3-30 Raychart 425 Chartplotter
All data is based on the SOG towards the current target. If the SOG is
negative, or data is not available, these fields are replaced with dashes,
one per character.
➤
To display Sunrise/Sunset information for a different date:
1. If the Set Up functions are displayed, press
CLEAR
to remove them;
press
ENTER
to display the position functions (Figure 3-45).
Figure 3-45: Position Functions
2. Select
PREVIOUS DAY
or
NEXT DAY
as required to display Sun-
rise/Sunset information for a particular date.
3. Select
TODAY
to return the display to current date.
➤
To set the position data manually:
1. Display the Position functions as described for Sunrise/Sunset dis-
play above (Figure 3-45).
2. Select
SET POSITION
then either:
i.
VESSEL POSITION
which sets the position to the current position of
the vessel, or
ii.
SELECT POSITION
which enables specific Latitude/Longitude data
to be entered.
Use cursor left/right to select individual characters to edit.
Use cursor up/down to select the required character.
iii.Press
ENTER
to complete, or
CLEAR
to abort, the change(s).
3.6 Transferring Waypoints and Routes
Displayed Waypoints
Waypoints and routes can be received and transmitted via NMEA, see
also Chapter 5, Section 5.3, Installing the Chartplotter. The NMEA link
could be to a PC, typically via a spare RS232 COM port.
Managing Database Lists
The
SEND WAYPOINTS
function sends all waypoints in the Waypoint List
and all routes in the Route List. Sending the Waypoint List does not affect
current routes.
Note: Sending the Waypoint List includes waypoints in an unsaved route.
D4992_1
SET
POSITION
PREVIOUS
DAY
TODAY
NEXT
DAY