Navionics Raychart 425, Owner'S Handbook Manual

Page: 49 / 114

Chapter 3: Operation 3-23
2. Use trackpad up/down to select the required destination and press
ENTER
to start the GoTo, or
CLEAR
to cancel the operation.
The operation is conducted in the same manner as for
GOTO PORT
above.
Stop Follow or Stop Goto
➤
To stop following the route or target point:
1. Either press the
GOTO
key or move the cursor over the target way-
point.
2. Select the
STOP GOTO
or
STOP FOLLOW
function (Figure 3-38):
Figure 3-38: Stop Follow/Stop Goto Soft Keys
The dotted line from the vessel to the target waypoint disappears.
3.5 Changing the Display Mode
Use the
PAGE
key to select the required display mode. Repeat presses of
the
PAGE
key provide the following display modes:
• Set Up functions (see Chapter 4)
• Course Deviation Indicator (CDI)
• Bearing & Distance Indication (BDI)
• Waypoint data
• Navigation data
• Time/Date data
• Return to Chart display
Note: Press
GOTO
in any display mode to return to normal Chart dis-
play.
D4689_1
STOP
GOTO RESTART
XTE
D4688_1
STOP
FOLLOW
RESTART
XTE
WAYPOINT
ADVANCE