Navionics Raychart 425, Owner'S Handbook Manual

Page: 20 / 114

2-4 Raychart 425 Chartplotter
sired mode on power-up. Simulated data should never be used for nav-
igational purposes.
➤
To view a chart image using simulated data:
1. Press the
PAGE
key to display the
SET UP
function bar (Figure 2-2):
Figure 2-2: Set Up Function Bar
2. Press trackpad left/right to highlight
SYSTEM SET UP
and press
ENTER
to display the System Set Up menu.
3. Use trackpad up/down to highlight the
SIMULATOR
option.
4. Use trackpad left/right to select
ON
.
5. If necessary, use trackpad up/down to highlight, in turn, the
SIMU-
LATED SOG
and
COG
options and trackpad left/right to set as required.
These set Speed in 1Kt intervals and Course in 1° intervals, respec-
tively.
6. Press
CLEAR
twice to return to the chart screen.
7. A flashing
SIM
indicator appears in inverse video in the status bar at
the top of the chart screen.
2.4 Controlling the Display
This section describes how to:
• Change the display mode.
• Move around the chart by panning the display, changing the chart cen-
tre and changing the chart scale.
Selecting the Display Mode
Use the
PAGE
key to select the display mode. Select the following modes
by repeat presses of the
PAGE
key as listed below and shown in
Figure 2-3:
• Set Up functions (see Chapter 4)
• Course Deviation Indicator (CDI)
• Bearing & Distance Indication (BDI)
• Waypoint data
• Navigation data
• Time/Date data
• Return to Set Up functions
Note: Press
GOTO
to return to normal Chart display at any time.
D4694_1