User’s manual NAVIGON 8410 PREMIUM EDITION | 8450 LIVE PREMIUM EDITION
Before you begin
- 15 -
Caution!
Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.
2.6
Preparing the navigation system for use
2.6.1
Assembling the mains adapter
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 12.
The mains adapter has an operating voltage of 100~240V. Various plug
adapters are available for the mains adapter. The adapter for the
country in which you have purchased the navigation device is enclosed.
►
Push the plug adapter into the slot on the mains adapter until it
locks in place.
2.6.2
Charging the rechargeable battery
It is possible that the rechargeable battery is not fully charged when you
unpack the navigation device. We recommend that you fully charge the
battery before using the device for the first time.
►
Connect the mains adapter to the navigation device and to a mains
socket.
Note:
Plug the USB connector into the navigation device as far it will
go! (Refer to "Troubleshooting" on page 136
.
)
The LED on the bottom of the navigation device lights up orange during
charging.
As soon as the battery is fully charged, the LED lights up green.
2.6.3
Installing the navigation system in the vehicle
Caution!
Be sure to refer to all the safety information in chapter
"Important safety information" on page 12.
