User’s manual NAVIGON 8410 PREMIUM EDITION | 8450 LIVE PREMIUM EDITION
Troubleshooting
- 137 -
I have connected the navigation device to a computer but it is not
detected as a removable disc.
The USB connector of the charger is not fully inserted in the case.
- or -
The USB connector is not connected correctly.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Insert the USB connector from the charger into the corresponding
socket of the navigation device swiftly as far as it will go (refer to
"Description of the navigation device" on page 10).
My navigation device makes no response any longer, the screen is frozen.
Perform a reset.
►
Use a thin object to press the
Reset
key (refer to "Description of the
navigation device" on page 10).
The software will be restarted. Your settings and your saved
destinations and routes will be retained.
It seems to me that the battery of my navigation device becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In
the
N
AVIGATION
window tap on Options > Settings > General.
2. Set the values for Brightness Day and Brightness Day as low as
possible.
3. Set Use Voice Command to Entering Addresses.
4. Tap
on
OK.
5. Tap
on
(Phone).
6. Tap
on
Options > Settings.
7. Set Bluetooth Function to No.
8. Tap
on
OK.
9. Tap
on
(Navigation).
10. The
N
AVIGATION
window is now open again.
I have accidentally activated demo mode.
If you have accidentally activated demo mode when you start the
navigation application for the first time, you can deactivate it again as
follows:
1. In
the
N
AVIGATION
window, tap on Options > Settings.
The
S
ETTINGS
window is opened.
