www.navig8r.com.au/m35
6
WARNING
Warnings
This M35 Navig8r should not be used in conditions of high temperature, high humidity
or dusty conditions. We recommend that the M35 Navig8r is not left in direct sunlight
for extended periods or left fitted to the windscreen or dashboard of the vehicle
while unattended.
Prolonged exposure to high temperature may cause the M35 Navig8r to malfunction
and even permanent damage to the M35 Navig8r.
There are no user serviceable parts in this device. Opening the device may cause
harm and damage the device. Any attempt to disassemble this device will void the
warranty.
Before Using Your GPS Unit
Please check the contents of the packaging and ensure that all equipment is
located and identified and the supplied SD card is inserted into the SD slot of the
device. The protective screen cover may be left on the device but may impede the
viewing of the device in normal operation.
Connect the GPS to the USB port of your computer for a period of 24 hours in the first
instance to charge and condition the battery. It may take several charge/discharge
cycles for the device to reach peak endurance.
Subsequent charging should take less time to complete.
Once the initial charge has been completed, turn the unit on by pressing and
holding the power button located on the top of the unit for 3 seconds. The M35
Navig8r should start at the System Main Menu.
Prior to using the GPS system for the first time it is recommended that the touch
screen be calibrated. Please see the system setting instructions further on in this
manual.
Mounting the GPS Unit in Your Vehicle
Fit the windscreen mount to the holder which you have attached to the rear of the
GPS unit and test mount the GPS on the windscreen of the car. Choose a position
that will not obstruct your vision whilst driving but that will also provide the GPS unit
the best coverage of the sky through the windscreen. The mount stem can be bent
to offer the best viewing.
This M35 Navig8r should only be fitted on fixed windows.
Once the best location has been determined, remove the protective film from the
suction cap of the windscreen mount and on clean glass fit firmly against the
