www.navig8r.com.au/m35
17
SYSTEM MENU
Note
: It is recommend that the settings are left to “Always On” if system is to be used
in a vehicle only. Reducing the time that the backlight remains on when not
connected to an external power source will extend the battery duration.
Sys Info:
Tap the SYS INF icon to display information about the hardware, software versions
and access the screen calibration screen.
Information displayed about the Processor, Ram
Size and Software version. (Information displayed
on actual unit may vary from information in this
image).
To calibrate the touch screen of the M35 Navig8r
please tap the Calibration button.
Calibration of the Touch Screen should be
completed using the supplied stylus to ensure
that the calibration is as accurate as possible.
Follow the instructions on the screen and touch the
end of the stylus to the centre of the cross displayed
on the screen. Repeat each time a new cross is shown
until all 5 crosses have been touched.
When the calibration has been completed this screen
will be displayed. Touch the screen again to return to
the System Info screen.
If the calibration fails the process will start again.
Repeat calibration until completed.
Tap
to return the previous menu.
