NAVCAM-FHD
USER MANUAL
11
NavCam-FHD Manual Ver 2.2 12/2013
Playback on TV
RCA Cable Connection
Connect the CRASHCAM-FHD to a TV or AV monitor with an AV cable (3.5mm phone plug
one end, RCA composite connectors on the other end).
Turn on the CRASHCAM-FHD and select Playback mode (as described above in Playback
mode setting).
HDMI Cable Connection
Connect the CRASHCAM-FHD to a TV or AV monitor with a HDMI cable.
Turn on the CRASHCAM-FHD and select Playback mode (as described above in Playback
mode setting). You will need a Mini HDMI to (normal) HDMI cable (not included)
Note:
1) A Micro SDHC card must be inserted into the device before recording.
2) The CRASHCAM-FHD supports cycle recording in increments of 1/2/3 minutes. It will
overwrite the oldest video files with new ones. Depending on the size of the Micro SDHC
card and the speed rating of the card, there may be as much as a 3 second pause whilst old
files are overwritten with the newer files. This pause time will not be recorded.
3) As the CRASHCAM-FHD has a DC5V input, please use the original car charger which will
step down the car’s 12/24VDC to 5VDC and fuse the circuit in the event of an overload. The
inline fuse is contained within the 12v DC plug and is replaceable.
Video/Photos Storage Capacity
Resolution
8GB
16GB
32GB
Video
1920*1080 (1080p)
60min
120min
240min
1280*720 (720p)
80min
160min
320min