NAVCAM-FHD
USER MANUAL
7
NavCam-FHD Manual Ver 2.2 12/2013
Note: A locked file must first be unlocked before deleting.
Video Recording Setting
Turn on the CRASHCAM-FHD (and press the REC button to stop recording) then press the
MENU button once (twice to enter system settings). Press the
▲
/
▼
buttons to select one of
the setting options and press then REC to select that option.
Available Options:
Option
Selection Options
Option Description
Resolution
Resolution
Select:
FHD 1920x1080
HD 1440x1080
HD 1280 x 720
WVGA 848x480
VGA 640x480
QVGA 320x240
Full HD 1920x1080 gives higher image
quality, less record time
VGA 640x480 gives longer record time,
less image quality
Loop recording
Select[Off, 1 or 2 or 3
Minute]
Select the time for each recording
segment. For example, if set to “1”, then
each video recorded is 1minute long. If set
to “off”, then the camera will record until
the SD card is full.
Exposure
+2.0,5/3,+4/3,+1.0,+2/3,+1/3
,+0.0,-1/3,-2/3,-1.0,-4/3,
-5/3,-2.0
Use this setting to adjust for varying
lighting conditions. U0/0 is suitable
for most environments
Motion
detection
Select [On/Off]
When set to “On”, the CRASHCAM-FHD
will begin recording when it senses
movement. For example, if the
CRASHCAM-FHD is left on, the camera will
begin recording if the image is disrupted
(like a person walking by).
Record Audio
Select [On/Off]
Turns the built-in microphone On or Off.
For privacy this can be turned off so that
no audio is recorded.
Date stamp
Select [On/Off]
Records the current date and time onto
the video file (date/time is set in the setup
options).
