Navig[8]r Navcam-HD, User Manual

Page: 7 / 13

NAVCAM-HD
USER MANUAL
7
Available Options:
Menu
Option
Selection Options Option Description
Format: Select [OK / Cancel] Select “OK” to format the Micro SD card. Warning,
formatting the card will erase all content on the card.
Language:
Select [English/ Simplified
Chinese/ Traditional Chinese/
Japanese /Russian /Korean/
Spanish/ German/ Portuguese/
Turkish] Choose a language for the on screen menu display
Default
Setting:
Select [OK / Cancel] Select OK to return the device settings back to the
original factory settings.
Frequency: Select [50HZ /60HZ]. For older television sets or monitors which cannot
auto select the refresh rate frequency, select 50Hz.
(generally not applicable for newer TVs in Australia /
New Zealand)
Date: Select [Set Date/
Cancel] Use this option to set the date and time on the
device. Should the device not be used for a long
period of time and should the battery run completely
flat, then the date/time will need to be re-set.
TV Out: Select [NTSC/ PAL] For older television sets or monitors which cannot
auto select the television display system/colour
information, select “PAL”. (generally not applicable
for newer TV’s in Australia / New Zealand)
Digital Still Camera (DSC) Mode Settings:
Turn on the NAVCAM-HD and press the “OK” button to stop recording. Press the MODE
button until the Yellow camera icon appears in the top left of the LCD display. Next press
MENU to enter into DSC mode settings. Press the
▲
/ ▼ buttons to select one of the setup
options and press OK to select that option. (pressing the MODE button again takes you back
to the Setup mode setting)
Available Options:
Menu
Selection Options Option Description