118 Operating the Boiler
Rotate the Command dial (
) to switch between
the test procedures. Press the Command dial (
) to
run a test procedure.
Press the Back button (
) to return to the previous
screen or menu.
Item
Description
1. Fan Motor
Test the fan operation by manually
changing the fan speed.
●
From a stopped state, the fan
speed gradually increases and
reaches the top speed, and then
the fan speed decreases until
the fan stops operating.
●
Rotate the Command dial (
)
to run or stop the fan test.
2. Boiler Pump
Test the boiler pump operation.
●
The boiler pump is turned on
as soon as you enter the test
mode.
●
Press the Command dial (
) to
toggle the pump operation (On
-> Off / Off -> On).
3. Zone 1
Pump*
Test the Zone 1 pump operation.
●
The Zone 1 pump is turned on
as soon as you enter the test
mode.
●
Press the Command dial (
) to
toggle the pump operation (On
-> Off / Off -> On).
Rotate the Command dial (
) to switch between
the parameters or to increase/decrease setting
values. Press the Command dial (
) to select a
parameter or to confirm after making changes.
Press the Back button (
) to return to the previous
screen or menu.
Item
Description
1. NaviLink
Connect
Turn on or turn off the remote
control capabilities via the
NaviLink connection.
●
Setting range: On/Off
●
Default: Off
2. AHU
Communication
AHU Communication is a
communication feature that
can be used with NCB-H boilers.
AHU has an RS-485
communication function. Its
communication protocol has to
match the NPE communication
protocol. Refer to “3.6.6
for piping diagram.
●
Setting range: Enable or
Disable
●
Default: Disable
Note
The connection settings for NaviLink or
the AHU are not available when a cascade
system is applied or the cascade protocol
is set to NR.
11.6.6 Diagnosing the Boiler System
To run a series of test procedures for a system
diagnosis, press the Back button (
) and the Menu
button (
) simultaneously for 3 seconds, and then
select “6. Test Mode”.
Summary of Contents for NCB-190/060H
Page 141: ...141 Appendixes 12 6 4 Fan Gas Assembly 10 9 12 8 7 3 1 2 4 5 6 13 11 11 14 15...
Page 143: ...Memo...
Page 144: ......