Navien LST-58K, Instruction Manual

Page: 30 / 56

31
Incomplete combustion, caused by oxygen deficiency,
may lead to a carbon oxide poisoning.
Installation in the above place may also cause earlier
product malfunctions.
Never install the boiler in a moist or enclosed
place such as a bathroom, a toilet.
Corrosive gas may damage the boiler and cause
incomplete combustion, eventually leading to a
carbon oxide poisoning.
Never install the product in a place with
corrosive gas such as ammonia, chlorine,
sulfur, acids.
Do not install the boiler near the electric equipment.
Do not install the boiler in an uneven or unstable place.
Do not install the boiler in a place with highly combustible materials.
Do not install the boiler in a place inadequate for safe installation of the oil tank.
Do not install the boiler in a place with special chemical agents (generating combustible
or corrosive gas).
Do not install the boiler in a place inappropriate for escaping to the stairway or the exit.
Do not install the boiler in a place which is not well drained.
Do not install the boiler below the shelf with unstable objects.
Do not install the boiler in a place inadequate for performing maintenance of the boiler
after installation.
Do not install the boiler in a place with noise and air pollution.
Do not install the boiler in a place where the wind generated from a vent, a range, or a hood
has an impact on air intake and exhaust.
Do not install the boiler in a place which is not well-ventilated.
Do not install the boiler in a place with strong wind.
Do not install the boiler in a place inappropriate for installing the chimney pipe (chimney).
Ȅ
Be sure to install the boiler in a sufficient place for check urepair of the boiler.
A space of more than 1m shall be providedfront of the boiler, in order to perform
maintenance and checks.
Naver install the boiler in the following place.
Other considerations