E. Workout
Mode
-
Application
example
-
Backward
tracking
06
E-
A typical application for this is backward tracking. If you are going to explore the wilderness without planning and
want to return back on the same trek. Then you may:
- Set LBD to, say 200 meters, and turn it ON:
Menu
>
Workout
>
SmartLap
>
ByDist
>
[ON, 200]
.
Remember that the maximum number of waypoints for a path is limited to 99. Set minimum LBD distance
accordingly and yet it will not exceed the limit. Waypoints beyond the path limited are ignored.
- Set L2WP path to Path9, and turn it ON:
Menu
>
Workout
>
SmartLap
>"
Lap
->
WP
">
[ON, Path9]
- Start Workout/Navigation trip: Navigation [S/S]
- If you want to stop and return, then press [S/S] to stop and hold [L/R] reset and ready to start new
Workout/Navigation.
- Turn OFF L2WP:
Menu
>
Workout
>
SmartLap
>
"Lap->WP”
>
[OFF]
- Select Path9 as the current path for navigation.
Menu
>
Navigation
>
SelPath
>
Path9
- Set navigation mode to backward.
Menu
>
Navigation
>
NavMode
>
Backward
- In the Navigation-Goto screen, select the last waypoint of Path9 as the current waypoint
- Start Navigation, follow the Heading Pointer, and the watch will guide you from last waypoint to the starting
precisely.
