background image

43

Condition/Problem

Things to Check

Solution

No display/partial display/
unit will not turn on

Check electrical (wall) 
outlet

Make sure unit is plugged into a functioning wall outlet.

Check connection at front 
of unit

Connection should be secure and undamaged. Replace power 
cord or connection at unit if either are damaged

Check Power Switch

Turn on the power with the Power Switch.

Check data cable integrity All wires in cable should be intact. If any are visibly crimped or 

cut, replace cable.

Check data cable
connections/orientation

Be sure cable is connected securely and oriented properly. 
Small latch on connector should line up and snap into place.

Check console display for 
damage

Check for visual sign that console display is cracked or other-
wise damaged. Replace Console if damaged.

Console Display

,I&RQVROHRQO\KDVSDUWLDOGLVSOD\DQGDOOFRQQHFWLRQVDUH¿QH

replace the Console.
If the above steps do not resolve the problem, contact Cus-
tomer Service (if inside US/Canada) or your local distributor (if 
outside US/Canada).

Unit operates but Contact 
HR not displayed

HR cable connection at 
Console

Be sure cable is connected securely to Console.

+5FDEOHER[FRQQHFWLRQ

Be sure cables from handlebars and cable to Console are 
secure and undamaged.

Sensor grip

Be sure hands are centered on HR sensors. Hands must be 

NHSWVWLOOZLWKUHODWLYHO\HTXDOSUHVVXUHDSSOLHGWRHDFKVLGH

Dry or calloused hands

6HQVRUVPD\KDYHGLႈFXOW\ZLWKGULHGRXWRUFDOORXVHGKDQGV

A conductive electrode cream (heart rate cream) can help 
make better conduct. These are available on the web or at 

PHGLFDORUVRPHODUJHU¿WQHVVVWRUHV

Static Handlebar

If tests reveal no other issues, Static Handlebar should be 
replaced.

Unit operates but 
Telemetric HR not 
displayed

Chest Strap (optional)

Strap should be “POLAR

®

´FRPSDWLEOHDQGXQFRGHG0DNH

sure strap is directly against skin and contact area is wet.

Chest Strap Batteries

If strap has replaceable batteries, install new batteries.

&KHFN8VHU3UR¿OH

6HOHFWWKH(GLW8VHU3UR¿OHRSWLRQIRUWKH8VHU3UR¿OH*RWR

the WIRELESS HR setting and make sure that the current 
value is set to ON.

Interference

Try moving unit away from sources of interference (TV, Micro-
wave, etc). 

Replace Chest Strap

If interference is eliminated and HR does not function, replace 
strap.

Replace Console

If HR still does not function, replace Console.

Unit operates but 
Telemetric HR displayed 
incorrectly

Interference

Make sure that the HR receiver is not blocked by a personal 
electronic device in the left side of the media tray.

No speed/RPM reading, 
Console displays “Please 

3HGDO´HUURUFRGH

Check data cable integrity All wires in cable should be intact. If any are cut or crimped, 

replace cable.

Check data cable
connections/orientation

Be sure cable is connected securely and oriented properly. 
Small latch on connector should line up and snap into place.

TROUBLESHOOTING

Summary of Contents for R628















































Reviews: