Rewinding the Antenna
Hold the tool and antenna
stationary.
Replace the antenna
retainer, and remove the
winding tool.
Insert the tool and antenna
into the round open space
in the back of the top cap.
Continuously turn the tool
clockwise to spool the
antenna until the retainer
can be replaced.
(Must be installed with proper
orien, - symbols)
How to install batteries
Unscrew two screws
on top cap
Tighten screws just
past point of resistance
Do not overtighten
Insert two batteries
The Nautilus GPS uses CR123 3V batteries.
The batteries should be replaced per the battery vendor's expiry
date as printed on the batteries and recorded on the back label
or after TEST mode battery change notice (alternating RED and
YELLOW LED).
Replacing the batteries requires a Philips #1 head screw driver
and a clean, lint-free surface. Do not overtighten screws.
Battery Information
+1 (604) 241-1918 www.NautilusGPS.com [email protected]
Proudly made in Canada
10
To rewind the antenna, use
the tool provided in the
box.
Pass the end of the antenna
through the slot of the
rewinding tool.
Summary of Contents for Marine Rescue GPS
Page 1: ......
