Press and hold Nautilus GPS Test Button for 5s until YELLOW indicator begins flashing.
Test sequence begins after Nautilus GPS has acquired position.
Approximately 20s after acquiring position the YELLOW Indicator will stop flashing (on solid)
and Nautilus GPS will transmit a low power Routine Own Ship Position Report.
This message will be received by all surrounding ships with AIS receivers. As well, if you
have programmed a ship MMSI (see page 7), the message will be received on the ship’s
VHF radio.
Low Battery indicated by alternate sequencing of YELLOW – RED indicators.
Replace batteries before next use.
Good Battery indicated by Nautilus GPS returning to IDLE.
2
1
3
4
5
6
Note: Test should be done at a temperature between 10-30 degrees Celsius.
Test Sequence
If distress cycle has been activated, the batteries should be replaced at the earliest
opportunity. Check the O-ring carefully for dust or contaminants before submerging
the unit.
Maintenance
+1 (604) 241-1918 www.NautilusGPS.com [email protected]
Proudly made in Canada
09
YELLOW LED flashes quickly when GPS location determined.
Summary of Contents for Marine Rescue GPS
Page 1: ......