36
© 2011
Nautilus Hyosung, Inc.
All Rights Reserved.
< Change Felt Module >
1. Release 2 Captive screws with a hand completely and take out Felt Module
as shown in Detail description. ☞ Rotate two Captive screws to the left in hand completely.
2. Change the FELT Module and reassemble it in reverse process.
< Change Cleaning Felt >
1. Separate Felt Module and rotate the felt adaptor in hand as shown Fig. Changing Cleaning
Felt
2. Remove the old one by using the pin set.
3. Change the new one by removing the tape.
4. Change Cleaning Felt and reassemble it in the reverse process.
FELT Module 교체 방법
Remove
Felt
Step 3
Step 1
Open
BM3
Lock Lever
Step 2
Captive
Screw
Detail Description
Used Felt
Felt
Adaptor
Summary of Contents for MX7700QT
