MoniMax 5600 6. Appendix
6 - 21
2) Receipt Printer
Error Code
Cause
Handling
20101
In case of detecting to be open lever of
print head before printing receipt paper
1.Close the lever of print head completely
20102
In case of detecting to be overheated in
print head before printing receipt paper
1.Wait the time until the temperature of head
adequately slow down and try to initialize
20103
Paper jam occurs in return path before
printing or cutting or discharging receipt
paper
1.Remove jammed paper between printer head and
rollers
20104
It is detected that paper is empty before
printing receipt printer
1.Replenish receipt paper
2.Check the status of sensor and its connctor
20105
It is detected that paper is not properly
set before printing
1.Check the status of setting paper
2.Check the status of sensor and its connctor
20106
Command is received while doing self-
test
1.After terminating self-test and initialize receipt
printer
20107
Receipt paper runs out of before printing
1.Replenish receipt paper in paper charger
2.Check the status of Near End sensor and its
connctor
20108
It is detected when paper is not properly
cut while operating
1.Check the Cutter module
2.Check if printer head lever is properly close
20109
Black mark is not properly detected in
receipt paper before printing
1.Check the status of Black mark sensor
2.Check if Dip switch # 6 is correctly set
(Dip switch # 6 is set by On in case of not using
Black mark)
2010A
The size of image print data is abnormal
while printing image
1.Check the AP version and initialize
20801
In case of detecting to be open lever of
print head after printing receipt paper
1.Close the lever of print head completely
20802
In case of detecting to be overheated in
print head after printing receipt paper
1.Wait the time until the temperature of head
adequately slow down and try to initialize
20803
Paper jam occurs in return path after
printing or cutting or discharging
receipt paper
1.Remove jammed paper between printer head and
rollers
20804
It is detected that paper is empty after
printing receipt printer
1.Replenish receipt paper
2.Check the status of sensor and its connctor
20805
It is detected that paper is not properly
set after printing
1.Check the status of setting paper
2.Check the status of sensor and its connctor
20806
Command is received while doing self-
test
1.After terminating self-test and initialize receipt
printer
Summary of Contents for MoniMax 5600
