Nautilus Hyosung MoniMax 5600, Operator'S Manual

Page: 103 / 127

MoniMax 5600 6. Appendix
6 - 33
Error Code Cause Handling
40052
The remaining notes at the sensor in
front of the CST after dispense operation
(CS11AB, CS21AB, CS31AB, CS41AB)
1. Remove the remaining notes at a sensor in front
of the CST
2. Realign notes in the cassette
3. Check abnormal clutch.
4. Check abrasion of the cassette box pick unit.
40054
CDU EP Program Error during dispense
operation (failed table search)
1. Initialize after resetting the power
2. Upgrade the CDU firmwave or re-download
software
3. Replace the CDU B/D
40055
Timeout due to note’s length error
passed through the CS13 during
dispense operation
1. Remove a jammed note between the tray and
CDU
2. Remove a jammed note at the position of the
CS13 sensor
3. Remove a dust on the CS13 sensor
40056
Abnormal operation of the gate solenoid
1 during dispense operation.
1. Remove a jammed note on the gate
2. Remove notes in the reject box and remount the
reject box
3. Check if the CS3 sensor bracket is bended.
4. Check if the CS3 sensor cable is disconnected
5. Exchange a sensor after abnormal operating
CS3 Gate detecting sensor.
6. Replace the reject solenoid 1
40057
Sum check error of note index setting
value in the CDU CST of EEPROM
during initializing
1. Read the CDU version to check CDU CST note
index
2. Reinitialize
3. Initialize after executing the CDU Information
Set(‘P’) Command
4. Replace the CDU board
40059
2 Cassette not available during dispense
reserved operation
1. Mount 2 cassette
2. Check if the CS17 sensor cable is disconnected .
3. Exchange a sensor after abnormal operating the
CS17 sensor .