Nautilus Hyosung MoniMax 5600, Operator'S Manual

Page: 125 / 127

MoniMax 5600 6. Appendix
6 - 55
H.2 How to Install this ATM at Customer Site
●
Unpacking
1 )
Unpack the machine on top of the palette.
2 )
Cut the straps that are fastened around the box with a knife.
(Be careful when cutting the straps.)
3 )
Use an appropriate tool to remove the nails from the palette.
4 )
Remove the lid, then box from the top. Do not discard the packaging materials until you have
verified any shipping damage claim. Contact your distributor immediately if you see any shipping
damage.
Store the box in a safe place to re-use or discard of appropriately.
5 )
Verify the contents carefully with the packing list to be sure all items listed are included. Notify
your distributor of any shortages.
6 )
If only the palette needs to be removed, lift the whole machine from the bottom and set it aside.
● Physical Installation
To install the Model MoniMax 5600 ATM, perform the following steps.
1)
Place the
“
Anchor bolts locate sheet
”
at the place where the machine is to be installed. (refer to
Fig.6.9)
Place the system on a flat surface. Be careful when opening the top or bottom of the machine
because it can be off balance.
2)
Place the Anchor nuts into the ground according to the anchor bolts locate sheet. (4 places)
3)
Place the Model MoniMax 5600 ATM on top of the sheet.
4)
Open the Security cover with the key provided.
5)
Using the supplied combination (factory preset at 1-2-3-4-5-6 or 50-25-50) open the Security Door.
This combination should be changed as soon as possible. Refer to Appendix E for
instructions on changing the lock combination.
6)
After the anchor nuts are in place according to the anchor holes on the bottom of
MoniMax 5600 ATM, tighten the anchor bolts tightly. (refer to Fig.6.9)