Nautilus Hyosung MoniMax 5600, Operator'S Manual

Page: 102 / 127

MoniMax 5600 6. Appendix
6 - 32
Error Code Cause Handling
40045
CS13 > required sheet(Separated
rejection)
1. Check notes dispensed and rejected
2. Remove dust in CS13 Sensor
3. Exchange sensor after abnormal operating CS13
Sensor
40046 Program error(Separated rejection)
1. Initialize after Reset Power
2. Upgrade CDU Firmware or Re-download
3. Exchange CDU B/D
40047
1 CASSETTE MISFEED
ERROR(Separated rejection)
1. Check notes in 1 Cassette
2. Check Sensor(CS6) Poll
3. Check jam in 1 cassette and reload
4. Remove dust in CS11A, CS11B Sensor
5. Exchange 1 cassette box when there are many
error
40049
Dispensing 0 sheets required is
error(Separated rejection)
1. Check received command
2. Check communication cable
3. Check CDU Firmware Version
4004A TIME OUT (JAM)(Separated rejection)
1. Remove jammed notes on CDU return path
2. Remove dust in CS11AB, CS21AB, CS31AB,
CS41AB, CS4AB, CS13
Sensor
3. Install after rearranging notes in cassette
4004B Continuous 10 times error if note is long
1. Check state of notes in reject box
2. Rearrange notes in cassette
3. Check Index of notes
4. Check foreign objects in the main motor encoder
slit.
5. Replace the CS8 encoder slit sensor
4004E
Detected the remaining notes during
dispense reserved operation
1. Initialize after removing the return path
2. Clean sensors on the return path (CS13)
40051
Received a request for over 121 notes
dispensing on the CDU from the upper
unit.
1. Check the CDU received command
2. Check the abnormal communication cable.
3. Check the CDU firmwave version and refer to
specifications.