Nautel NX200, Installation And Operation Manual

Page: 52 / 97

WARNING
Ensure the main ac power source for the transmitter system is disabled or locked out
before proceeding. If this is not observed, voltages that are fatal will be present.
NX200 Main-Standby Transmitter System Installation and Operation Manual
Page 2-37
Section 2 Preparation for Use and Installation Issue 0.3
2.3.9 Ac Power Components - Installation Tasks
Appendix References:

Appendix A

Appendix D (various documents)
NOTE
It is highly recommended you position ALL of the transmitter system's components in their
final locations prior to installing cable trays, interconnecting wiring, plumbing, transmission
line and ventilation.
IMPORTANT!
You must have a licensed electrician to install all ac wiring and switches to
ensure proper operation of equipment and safety to personnel. Failure to observe this
requirement may result in voiding of the warranty.
See Table 2-7 for specifications and kits associated with the ac mains equipment used in
each NX200 Transmitter system.
Table 2-7:
Specifications and Kits for the Ac Main Equipment for the NX200 System
System
Mains
Equipment
Breaker
Panel
Primary
Wiring
Kit #
Secondary
Wiring
Kit#
Surge
Box
Kit#
Ac
Disconnect
Switch
Emergency
OFF Switch
Wiring Kit #
NX200
(Common)
228-8309 -01
800 A
317.5 kg
(700 lbs)
UE183A
228-8322-01 228-8323 -02 228-8310 228-8422 228-8326