GV60 TROUBLESHOOTING MANUAL
RESPONDING TO ALARMS
VERSION 1.0 2018-01-01
PAGE 4.1.61
Reject Load/Splitter Interface Assembly Replacement
.
1.
Open the appropriate front door and remove the appropriate upper, rear panel.
2.
From the front of the transmitter:
Gain access to the reject load/splitter interface assembly (A28 or A30) by removing the fan
cover (M5 screws at the top and hooks in the bottom) and lifting the panel out.
Remove the two M5 screws that secure the reject load/splitter interface assembly to the
transmitter.
3.
From the rear of the transmitter:
Disconnect the mating connectors from the reject load/splitter interface assembly (A28 or
A30).
Pull out the reject load/splitter interface assembly.
4.
Obtain a replacement reject load/splitter interface assembly (Nautel Part # NAX269) and install it
by reversing the instructions in steps 1 through step 3.
Summary of Contents for GV60
