Nautel Exporter Plus, Technical Instruction Manual

Page: 69 / 186

Exporter Plus Technical Instruction Manual Remote interfacing
Issue 1.0 2020-05-05 Page 7-17
Eth0Status, Eth1Status - view only
root@Exporter Plus AM:/mnt/run# ./epCU.x -v Eth0Status
IP 10.10.10.10
255.255.255.0
HW 00:18:7D:16:AC:ED
ViewSoftwareFeatures - view only
root@Exporter Plus AM:/mnt/run# ./epCU.x -v ViewSoftwareFeatures
RemoteConfiguration is enabled
====================
Features found in trusted storage:
Feature 1:
RemoteConfiguration 1.0
permanent 1 ISSUED=17-jun-2013 START=2-apr-2013
Valid for acquisition
====================
Features found in trials storage:
====================
Features found in short-code storage:
====================
LicenseServer - view and set
root@Exporter Plus AM:/mnt/run# ./epCU.x -s LicenseServer "license.nautel.com
8888 flexnet/deviceservices"
LicenseServer=license.nautel.com 8888 flexnet/deviceservices
RunLicenseUpdate - view and set
Setting causes a license update. Once the update completes, this item reverts to 0. The results
shown below are expected.
root@Exporter Plus AM:/mnt/run# ./epCU.x -s RunLicenseUpdate 1
RunLicenseUpdate=no
Notes: LicenseServer and RunLicenseUpdate are valid commands, but are no longer necessary as
of SW version 1.10.0.