Nautel Exporter Plus, Technical Instruction Manual

Page: 132 / 186

Exporter Plus Technical Instruction Manual Operating
Page 8-62 Issue 1.0 2020-05-05
Setting PSD receive port
When you select
PSD Receive Port
from the
STATION INFO
menu (see Figure 8.132 ) you can set
the PSD receive port number
.
Figure 8.132: PSD Receive Port Screen
To change the PSD receive port, press the checkmark (accept) button to enter the editing
screen shown in Figure 8.133 on page 8-62 .
Figure 8.133: PSD Receive Port Editing Screen
Use the right and left buttons to highlight the desired digit in the new PSD receive port value,
then use the up and down buttons to to increase or decrease the value as desired. Press the
accept or cancel button to enter the Save/Cancel screen (see Figure 8.4 on page 8-5 ). Save or
cancel as desired.
Note: This port is also shared with ActiveRadio/EAS.