Nautel Exporter Plus, Technical Instruction Manual

Page: 113 / 186

Exporter Plus Technical Instruction Manual Operating
Issue 1.0 2020-05-05 Page 8-43
Figure 8.92: Audio Source Editing Screen
Use the up and down buttons to highlight the desired audio source (
Digital In
,
Live Analog
,
Delayed Analog
,
Generated Tone
,
Generated Pulse
or
RTP Stream In
). You can adjust the
volume of the signal applied to the headphone jack (see “Adjusting headphone volume” on
page 8-43 ). If you select
Generated Tone
or
Generated Pulse
as the audio source, you can also
set the test tone frequency (see “Setting test tone frequency” on page 8-44 ) and its left-right
content (see “Setting test tone left-right content” on page 8-46 ). Press the accept or cancel
button to enter the Save/Cancel screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.
Adjusting headphone volume
When you select
Headphone Volume
from the
AUDIO MONITOR
menu (see Figure 8.93 ) you
can adjust the volume of the audio source being monitored at the front panel headphone jack
.
Figure 8.93: Headphone Volume Screen
To adjust the headphone volume, press the checkmark (accept) button to enter the editing
screen shown in Figure 8.94 on page 8-44 .