Nautel Exporter Plus, Technical Instruction Manual

Page: 44 / 186

Exporter Plus Technical Instruction Manual Quick setup procedure
Page 6-6 Issue 1.0 2020-05-05
Figure 6.4: Network Configuration
1. Enter the UI’s
Edit Settings - Network Config
page (see Figure 6.4 ).
2. Select the appropriate item from the
NETWORK CONFIG
list. If necessary, configure the
mode, IP address and netmask for one or both Ethernet ports (0 and 1), as applicable,
and the default gateway address. If changes are made, save each setting.
3. Set
Enable IP Forward
to
Yes
if both Ethernet ports are used.
Factory default settings
Eth 0 Mode = Static
Eth 0 IP Address = 10.10.10.10
Eth 0 Netmask = 255.255.255.0
Eth 1 Mode = Dynamic
Eth 1 IP Address = N/A (dynamic)
Eth 1 Netmask = 255.255.255.0
Default Gateway = 0.0.0.0
DNS Server IP = 0.0.0.0
Enable IP Forward = Yes
NOTES:
Eth 0 is typically used to connect to the Exgine or Importer.
Eth 1 can optionally be used to connect tthe Exporter Plus to a customer network.
To access external networks, set the Default Gateway IP for the IP of the customer supplied router.
DNS Server IP is used only for Static IP mode. If DHCP (Dynamic) is selected for either interface, the
DHCP will provide the DNS IP.