Nautel Exporter Plus, Technical Instruction Manual

Page: 134 / 186

Exporter Plus Technical Instruction Manual Operating
Page 8-64 Issue 1.0 2020-05-05
Setting default PSD timeout
When you select
Def PSD Timeout
from the
STATION INFO
menu (see Figure 8.136 ) you can set
the amount of time to wait for PSD values to be received, after which default PSD values are
displayed
.
Figure 8.136: Def PSD Timeout Screen
To change the default PSD timeout, press the checkmark (accept) button to enter the editing
screen shown in Figure 8.137 .
Figure 8.137: Def PSD Timeout Editing Screen
Use the right and left buttons to highlight the desired digit in the new default PSD timeout
value (in minutes), then use the up and down buttons to to increase or decrease the value as
desired. Setting this value to 0 will disable the PSD Fault Timeout alarm. The maximum
setting is 36,000 seconds (10 hours). Press the accept or cancel button to enter the Save/Cancel
screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.