ErgoJust ICU Cart System
August 22, 2017
4-25
Verifying the ISO or UPS voltage
Your system is configured with the line voltage for the value appropriate to the shipping
address. If your system is moved between countries, you may need to guard against possible
damage to the electrical components due to improper input voltage.
Make sure all voltage settings for each component of your system are set properly for the
voltage source you will be using.
Verify fuse amperage matches in input voltage rating on the label.
Make sure the ISO or UPS Power switch is in the OFF position and the ISO or UPS is fully
disconnected from its power source before continuing.
1. Remove the three screws from the sides of the ISO or UPS cage (Figure 1).
Figure 1.
2. Slide the rear cover away from the ISO or UPS (Figure 2).
Figure 2.
3. Verify the input voltage printed on the ISO or UPS label is correct for the voltage source that
will be used to power the ISO or UPS (Figure 3).
Figure 3.