ErgoJust ICU Cart System
August 22, 2017
4-19
Adjusting the handle height
1. Bend the middle of the basket (
A
) slightly away from the handle and swing the bottom of the
basket (
B
) towards yourself until the two basket mounting tabs snap free from the two
mounting holes (Figure 1).
Figure 1: Removing the basket from the handle.
2. Press in on the left side of the basket or, using a flat blade screwdriver, carefully pry the side of
the basket away from the handle (Figure 2) until the basket mounting tab is free from the side
mounting hole.
Figure 2: Carefully pry the side of the basket away from the handle and pull basket down.
3. Carefully pull downward on the basket until the other side is free from the handle and set the
basket aside.
NOTE
: Do NOT remove the screws in the next step or the handle securing plate will slide
down inside the slot on the bottom mast.
4. Loosen all four handle securing screws until the handle can be slide up or down.
Figure 3: Loosen all four securing screws.
5. When positioned at the desired height, tighten all four securing screws.
6. Replace the basket (see page 4-21).